Drill Sergeant

Now that winter is mostly over I can finally start to work on the projects I’ve been putting off- including doing some more testing with my baseball-and-mini-pumpkin-hurling, drill-powered slinged-centripetal machine.

Image

One of the things I’ve learned about these types of machines is how powerful drag can be, even with a small machine like this. One suggestion I got was to use two drills, so that’s what I’ll be trying next.

Image

So the plan is to make something like a transfer case in a 4×4, but in reverse- use a chain drive to combine two power sources into one. Right now it’s almost done, I just need to make sure everything is lined up properly and attach it to the machine.

Image

Once that’s done the plan is to measure the RPMs and compare 1 vs 2 drills, and eventually test the range.

Advertisements

2 thoughts on “Drill Sergeant

  1. Angiportus says:

    Good to see you are still around! The double drill idea might work but make sure they are evenly matched, and so is the strength of the hands turning them; I fear that an imbalance might cause one to make the other act as a generator, and this would not help the hurling process. All right, my understanding of this is not perfect, but time will tell.
    You might also experiment with gear ratios, if you have a bigger drill around.

    • That is a concern- fortunately both drills have the same make, voltage and max. RPMs so it shouldn’t be a problem. I guess I’ll find out! Both drills also have high & low gears, which I’ll try out when I do my arm RPM testing.

Leave a Reply to teampendragon Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s